ClubSi.com - The Club Si home page
Join in on a hot topic now! ClubSi Message Forums Todays Hot Topics Featured Members Rides ClubSi Store
Official 06+ DIY Thread and Useful Info - ClubSi
Page 1 of 1 1
Topic Options
#2862378 - 07/28/08 10:35 PM Official 06+ DIY Thread and Useful Info
Design Moderator Offline
Post Master Sr


Registered: 12/11/02
Posts: 5621
Loc: The OC
Alright, here's the starter for the 06 DIY (Do-It-Yourself) thread. This thread will remain locked for DIY information and useful links. All related discussions can be found in the link below:
http://forums.clubsi.com/ubbthreads.php/ubb/showflat/Number/2855037

Official DIY rules:

1. No linking to other DIY threads on other boards. This is focused on building a DIY database specifically on this site.

2. You can repurpose information from another post/board, but you MUST credit the original thread creator. As a courtesy to them and their hard work, please re-host any associated pictures/diagrams.

3. All DIY information is expected to follow standard safety protocol. CSI will not be held responsible for any of the information held within this thread. Hence, attempt at your own risk.

4. If you'd like to contribute a DIY post, please review any related posts (if any) in this thread first. Then post a brand new topic in the 06 forum and PM me. If I approve, I will link it here.

5. It is OK to offer alternative opinions/suggestions, but please, PLEASE keep comments focused on DIY related information. It is OK to offer alternative opinions/suggestions, but I WILL NOT tolerate flaming of members in DIY threads - especially those who work hard to bring us useful information.

If any posts or comments violate the above rules, please click the 'notify' icon or PM me. Thanks in advance to the members who contribute.

_________________________
09 CWP MS3
00 EBP Si - Sold - Pics
89 Camaro - Sold
CSI. What's your diversion?
Recent video projects: Toys-4-Tots NMS 2007 Si Rocket's Boosted EM1

Top
Visit Sponsors! Help CSi !
Sponsored Links
Member
*****




Top
#2890105 - 08/06/08 06:55 PM DIY : P2R Lower Rear Tie Bar
EvaSivE Offline
Newbie


Registered: 07/10/08
Posts: 3
:)For sean over at P2R --great cust service and extremly fast shipping

Here is the P2R Rear Lower Tie Bar now offered by Power Rev Racing...


Parts Needed:
14mm ratchet
2 jacks *recommended you use good jacks (or you can use car ramps)
bout 20 minutes of time

I used 2 jacks for this job. One I used to jack up one side of the car as you would to change your tire. The other i put right underneath each bolt that I was taking out on the control arm to supoort it up..
In the first pic you can see where i located the jack and began to remove the left side 14mm bolt. I suggest doing it one side at a time...

--------------------------------------------------------------

Here is a better pic of the jack holding the control arm in place. Also Now you can see the left side is installed. Make sure you dont tighten all the way and you need to move it for the other side...


Now just do the same exact thing on the other side. Jack it up and place other jack under control arm for support. Remove bolt and place P2R tie bar in place and add bolt. Tighten.

here are a few pics of this sweet a$$ part installed!!








Edited by EvaSivE (08/06/08 06:59 PM)

Top
#2892815 - 08/07/08 04:54 PM Front Wheel Stud DIY
AX-NY'06Si Offline
Jr Member


Registered: 09/19/06
Posts: 621
Loc: Southern NY State
http://forums.clubsi.com/ubbthreads.php/ubb/showflat/Number/3350533


Edited by Design (01/04/09 03:15 AM)
Edit Reason: Updated with archived link
_________________________
'06 NBP Si w/ OEM fogs
'06 Mazda 3S GT

Top
#3340569 - 12/29/08 05:18 PM Re: Front Wheel Stud DIY [Re: AX-NY'06Si]
Design Moderator Offline
Post Master Sr


Registered: 12/11/02
Posts: 5621
Loc: The OC
Rear brake pad DIY courtesy of AX-NY'06Si:
http://forums.clubsi.com/ubbthreads.php?ubb=showflat&Number=3340561#Post3340561
_________________________
09 CWP MS3
00 EBP Si - Sold - Pics
89 Camaro - Sold
CSI. What's your diversion?
Recent video projects: Toys-4-Tots NMS 2007 Si Rocket's Boosted EM1

Top
#4567984 - 03/05/10 09:54 AM Re: Front Wheel Stud DIY [Re: Design]
Design Moderator Offline
Post Master Sr


Registered: 12/11/02
Posts: 5621
Loc: The OC
Camber kit DIY courtesy of Dvsidboy:
http://forums.clubsi.com/ubbthreads.php?ubb=showflat&Number=4567977#Post4567977
_________________________
09 CWP MS3
00 EBP Si - Sold - Pics
89 Camaro - Sold
CSI. What's your diversion?
Recent video projects: Toys-4-Tots NMS 2007 Si Rocket's Boosted EM1

Top
Page 1 of 1 1


Moderator:  Design, Jimmmmmmah!!!, Type X 
Hop to:
Shout Box