? about stock IM

You are not logged in. [Log In] ClubSi » Forums » Performance Tuning Zone » NA Tuning » ? about stock IM

Page 1 of 1

Topic Options

#55350 - 09/13/04 02:05 AM ? about stock IM
CivicVTi CivicVTi Sr Member Registered: 12/02/99 Posts: 1176 Loc: Athens , Greece	What is the diameter of the stock IM opening (b16a)? I found a good deal on an ITR TB (which is 62mm I think) and I wonder if I have to port the IM opening (which should be at least 60mm, like the stock TB I believe). _________________________ Honda Civic VTi '95 EG6 hatch (stock B16A2) B18C6 specR swap (Euro)
Top

Videos

#55351 - 09/13/04 07:06 AM Re: ? about stock IM
kysi kysi Jr Member Registered: 12/20/02 Posts: 494 Loc: kentucky	Honda/Acura Throttle Body Inside Diameters (in mm) b18c1 60 b18c spec R 62 b18a 58 b18b 60 b16a SiR 58 b16a Sir2 / b16a2 60 b16a3 58 b20b/z 60 f20c 62 d15b7 56 d16a6 55 d16y7 56 d16y8 56 d16z6 56 ZC 55 d16a1 55 d16a8 55 h22a / h23a 60 f22 / f23 60 Hope that helps. Larry Edited by kysi (09/13/04 07:40 AM) _________________________ People fail when there is a wishbone where their backbone should be.
Top

#55352 - 09/13/04 11:42 AM Re: ? about stock IM
CivicVTi CivicVTi Sr Member Registered: 12/02/99 Posts: 1176 Loc: Athens , Greece	Thank you very much for the reply. What about intake manifold diameters. I suppose they are not exactly the same with the TB used. I would like to know the b16a2 and b18c5 (R) IM diameter (I think skunk2 opening is 65mm). _________________________ Honda Civic VTi '95 EG6 hatch (stock B16A2) B18C6 specR swap (Euro)
Top

#55353 - 09/13/04 12:46 PM Re: ? about stock IM
kysi kysi Jr Member Registered: 12/20/02 Posts: 494 Loc: kentucky	This is what I came up with from some stats I had stored. Engine specifications between B16A and B16B. (ITR intake manifold is same as CTR) Engine Type B16A------ B16B 98 Spec.R Maximum Output 170ps/7800rpm-------185ps/8200rpm Maximum Torque 16.0kg-m/7300rpm----------16.3kg-m/7500rpm Bore x Stroke 81.0x77.4mm -------<- same Displacement 1595cc--------- <- same Compression 10.4 ---------------- 10.8 Maximum RPM 8000rpm------- 8400rpm Valve Timing at 1mm lift IN Open/Close BTDC15/ABDC45-------- BTDC18/ABDC45 EX Open/Close BBDC40/ATDC7 -------- BBDC45/ATDC10 Valve Lift IN 10.7mm, EX 9.4mm IN 11.5mm, EX 10.5mm Inlet Valve Diamter 33mm x 2mm <- same Spark Plug Type Heat Rate #6 Heat Rate------- #7 platinum Throttle Bore Diameter 60mm ----------<- same Intake Manifold Single pipe sideflow----------- <- same Air Intake Diameter 65mm -------<- same Exhaust Manifold 4-to-2 -------<- same Exhaust Pipe Diameter 48.6-50.8mm 57.2mm Silencer Flow Capacity 98liter/sec 115liter/sec _________________________ People fail when there is a wishbone where their backbone should be.
Top

#10616580 - 08/21/24 06:57 PM Re: ? about stock IM [Re: kysi]
1337sb 1337sb Post Master Supreme Registered: 11/03/10 Posts: 19642 Loc: :arizona:	J35Y6 here, looking for stage 1 upgrades
Top

Page 1 of 1

Previous Topic View All Topics

Hop to:

Shout Box

CSi Sponsors

ClubSi.com Shirts
ClubSi-Shirts
GameStop
Black-Friday Specials
Big Brake Kits
StopTech.Sale BBK Clearance
Brake Kits
Buy Brake Kits
EBC Brake Kits
EBC Brake Kits
BuyBrakes
Brake Kits-Pads & Rotors Sets
StopTech Brake Kits
StopTech
StopTech NZ
StopTech
StopTech Australia
StopTech
Hawk Brake Pads
Hawk Brake Pads
Samys Camera
GoPros, Cameras, Gear
Brake Specials Near Me
Brake Specials Near Me
Brake Pad Coupons
Coupon Code "hondafetish"
Porsche Brakes
Porsche Brake Upgrades
2-Piece Rotors-Civic Type-R
2-Piece Civic Rotors