Page 2 of 3 <123>
Topic Options
#50758 - 10/21/04 10:41 PM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
SoLOW Offline
Newbie


Registered: 10/19/04
Posts: 2
just got done doing mines, i was kinda nervous cutting a hole in my fender. in the end it looks real nice and this write-up helped ALOT. thanks guys!! heres a pic or 2
sorry about the quality *camera fone*


Top
Visit Sponsors! Help CSi !
#50759 - 10/22/04 03:21 AM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
SiToeKnee Offline
Major Member


Registered: 11/13/03
Posts: 1447
Loc: Irvine, CA
good work, looks really good.
_________________________
99 EBP Si I/H/E

Top
#50760 - 10/22/04 09:54 PM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
Trixiem Offline
Post Master Sr


Registered: 03/10/03
Posts: 3031
Loc: Las Vegas, Nv
why yes it does

-kenny

Top
#50761 - 10/23/04 05:43 PM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
SoLOW Offline
Newbie


Registered: 10/19/04
Posts: 2
is there anyway to secure it on my fender, because it seems so easy to steal.
Top
#50762 - 10/23/04 06:33 PM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
Solscud007 Offline
Poster


Registered: 03/15/02
Posts: 263
Loc: Irvine, Ca
glue it on? Or maybe you can make a pice of metal or something that you can screw from the back to lock it in place?

Hey guys thanks for the head up on the metal nibblers, They work like a charm,
_________________________

Top
#50763 - 10/25/04 11:23 AM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
Sir Ironpool Offline
Sponsored by Toyota
Post Master Supreme


Registered: 03/12/01
Posts: 71770
Loc: Long Beach, CA
Yeah...they are easy to steal. Somebody swiped mine (I'm the OG sidemarker diy'er, Kenny and Tony rode my nuts on this one. ) so I picked up some smoked clear knockoffs that look better with my black and white car.

I don't think you could do anything from the outside, but I suppose that you could pull the fender off and rig up a bracket or something.
_________________________

Top
#50764 - 10/26/04 05:37 PM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
Trixiem Offline
Post Master Sr


Registered: 03/10/03
Posts: 3031
Loc: Las Vegas, Nv
Quote:

Yeah...they are easy to steal. Somebody swiped mine (I'm the OG sidemarker diy'er, Kenny and Tony rode my nuts on this one. ) so I picked up some smoked clear knockoffs that look better with my black and white car.

I don't think you could do anything from the outside, but I suppose that you could pull the fender off and rig up a bracket or something.




lol yup chris did it first and gave US advice

-kenny

Top
#50765 - 01/20/05 10:22 PM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
slowciv Offline
Poster


Registered: 09/08/04
Posts: 211
Loc: Sioux Falls, SD
I Just want to say thank you so much. this thread was a BIG help today when i installed my markers.






Edited by slowciv (01/20/05 10:35 PM)

Top
#50766 - 01/21/05 03:25 PM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
2000CheetahStud Offline
Post Master Supreme


Registered: 02/10/03
Posts: 49203
Loc: Cincinnati, OH
props man, looks nice!
_________________________
2016 4Runner Trail Edition | 2000 Honda S2000 | 1976 Honda CB360T | 1979 Suzuki GS750 | 1978 Suzuki GS1000 Restomod

photobucket.jpg

Top
#50767 - 01/26/05 12:50 AM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
slowciv Offline
Poster


Registered: 09/08/04
Posts: 211
Loc: Sioux Falls, SD
Quote:

props man, looks nice!




Thank you
_________________________
1996 Honda Civic EX -JDM B16a w/LSD 1991 Acura Integra GS -LSVtec (165whp)

Top
#50768 - 01/26/05 10:01 PM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
SiToeKnee Offline
Major Member


Registered: 11/13/03
Posts: 1447
Loc: Irvine, CA
nice work, looks great. glad that our how-to helped you out.
_________________________
99 EBP Si I/H/E

Top
#50769 - 01/27/05 01:53 AM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
Trixiem Offline
Post Master Sr


Registered: 03/10/03
Posts: 3031
Loc: Las Vegas, Nv
indeed looks really really good

-kenny

Top
#50770 - 01/30/05 10:27 PM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
manuels92si Offline
Newbie


Registered: 12/23/04
Posts: 26
Loc: California, LA, D-TOWN
looks kool, did u (SiToeKnee ) get any gaskets for your side markers? i went to a junk yard and there were some jdm fenders with markers and they had a gasket for da lights. i'll post sum pics tomorrow if i can. by the way, any1 know wat bulbs fit jdm eg-6 lights. H4's dont fit. i allready got the wedge bulbs.
Top
#50771 - 01/31/05 03:09 PM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
SiToeKnee Offline
Major Member


Registered: 11/13/03
Posts: 1447
Loc: Irvine, CA
Quote:

looks kool, did u (SiToeKnee ) get any gaskets for your side markers? i went to a junk yard and there were some jdm fenders with markers and they had a gasket for da lights. i'll post sum pics tomorrow if i can. by the way, any1 know wat bulbs fit jdm eg-6 lights. H4's dont fit. i allready got the wedge bulbs.




No, we did not use gaskets on our sidemarkers, the fit was close enough to the frame that water didn't really get in. I've had them on through a rainy season and have not had any rust problems. The coating of touch up paint on the raw metal should be enough to prevent rust, but if you can get the gaskets, and you'd feel more comfortable with them, go ahead and put them on. Trixiem and I live in Southern California where rain is not really that big of an issue. Sorry, can't really help you with the headlight problem, sounds like you might have to get a non-US headlight bulb for those JDM headlights. A couple of aftermarket stores sell them, I can't say which ones off the top of my head right now though.
_________________________
99 EBP Si I/H/E

Top
#50772 - 02/02/05 01:59 AM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
Trixiem Offline
Post Master Sr


Registered: 03/10/03
Posts: 3031
Loc: Las Vegas, Nv
Rust is not a problem as long as you make sure you coat the bare metal with touchup paint.

-kenny

ps bald azenis sports suck in rain

Top
#50773 - 02/04/05 03:33 AM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
SiToeKnee Offline
Major Member


Registered: 11/13/03
Posts: 1447
Loc: Irvine, CA
Quote:

Rust is not a problem as long as you make sure you coat the bare metal with touchup paint.

-kenny

ps bald azenis sports suck in rain




amen to that ps jackass.
_________________________
99 EBP Si I/H/E

Top
#50774 - 02/12/05 02:18 AM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
SpinningDUBz Offline
Poster


Registered: 10/24/04
Posts: 298
keep the good how to threads rolling in tony and kenny . glad i installed mines also looks 100x better than with out one. which i bought from ICB also.
_________________________
Alex/Ben
AIM: FiveLugNinja
http://www.myspace.com/thesoundsfanatic

Top
#50775 - 02/23/05 04:17 PM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
ChrisLaw Offline
Post Master Sr


Registered: 01/21/05
Posts: 5040
Loc: Lexington, KY
Looks pretty trick. I thought for half a second about doing it but I decided the yellow wouldn't look good with the black housing JDM lights that are in the mail. Always need that extra little something to set yourself apart from anybody and everybody.

Oh wait, just found 'em on Ebay, and they make them in clear.... Hmmmmm.
_________________________
1991 Nissan 240SX

Top
#50776 - 03/25/05 09:38 AM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
ChrisLaw Offline
Post Master Sr


Registered: 01/21/05
Posts: 5040
Loc: Lexington, KY
I bought them in amber anyway, They are used JDM from japan and come with the OEM connector plugs some of you guys asked about. Problem is the plugs have three wires coming out of them. I need to know where to splice the third wire. Leave oit dangling? Or should I just use the dang female crimp connectors even though I am afraid they will fall off?

*edit* they came in today, stupid thing is I was excited because I thought before I opened the box that it would be the cam plate bolts that I need to make the car run. instead they are the damn side marker lights. DOH!

*edit again* Ok, two of the three wires are green with white stripes and the third is all black, somebody help me with this. I assume that i will use the green wires to tap and just leave the black one alone.

*edit once more* F-it I'll just use the crimp connectors. I have some lying around somewhere!


Edited by ChrisLaw (03/29/05 10:39 PM)
_________________________
1991 Nissan 240SX

Top
#50777 - 03/27/05 07:00 PM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
deeksmooth Offline
Newbie


Registered: 03/07/05
Posts: 1
Loc: USA
thx for the write up, i did this last night and it turned out great... i found the dremel easier to use if you've got a strong/steady hand.




and i did a good job at breaking my temp gauge needle when i dropped the CTR bezel in... had to order a new gas/temp assy.



pics are from a nextel i860 cam phone so the quality isn't that great.
_________________________
"So I says to the exhaust, shhh..." OEM CTR, silence at its finest. www.bpfracing.com - Go there for my for sale items!!! ..... HT Vouch Thread My Ebay Feedback

Top
#50778 - 04/01/05 05:31 PM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
ChrisLaw Offline
Post Master Sr


Registered: 01/21/05
Posts: 5040
Loc: Lexington, KY
Oh SNAP! somebody put a hole in my fender....

So I put these light up thingies in them for now

went with the JDM blinking option...
_________________________
1991 Nissan 240SX

Top
#50779 - 04/04/05 08:06 AM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
CTR Offline
Post Master


Registered: 09/17/03
Posts: 2536
Loc: Toronto, Ontario
does anyone have a pic of a JDM CTR fender for comparison purposes to see where the JDM fenders have the holes cut?

Those side markers that you guys installed look a bit higher then the JDM ones. It looks great though.
_________________________

Top
#50780 - 04/04/05 07:59 PM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
ChrisLaw Offline
Post Master Sr


Registered: 01/21/05
Posts: 5040
Loc: Lexington, KY
i think i put mine in backwards, I have the more protruding portion to the front...
_________________________
1991 Nissan 240SX

Top
#50781 - 04/08/05 02:52 AM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
d0hc81 Offline
Newbie


Registered: 04/08/05
Posts: 2
Loc: ca, USA
here you go, 96-98 spec








Edited by d0hc81 (04/08/05 02:59 AM)

Top
#50782 - 04/08/05 01:55 PM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
ChrisLaw Offline
Post Master Sr


Registered: 01/21/05
Posts: 5040
Loc: Lexington, KY
AH CRAP! I did do them backwards! Oh well, They don't look bad and nobody will notice unless that particular person is one of you guys(girls)
_________________________
1991 Nissan 240SX

Top
#50783 - 04/08/05 11:04 PM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
d0hc81 Offline
Newbie


Registered: 04/08/05
Posts: 2
Loc: ca, USA
its ok, i did mines backwards too.
Top
#50784 - 04/22/05 03:50 PM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
chitown Si Offline
Newbie


Registered: 12/05/04
Posts: 24
Loc: Chicago, IL
i cant get the template to print out the right size, any suggestions?
Top
#50785 - 04/22/05 07:23 PM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
ChrisLaw Offline
Post Master Sr


Registered: 01/21/05
Posts: 5040
Loc: Lexington, KY
look at the measurements/picture and create your own template. Thats what I did, just use a ruler, measure twice, cut once.
_________________________
1991 Nissan 240SX

Top
#50786 - 10/23/05 12:05 PM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
5iveLug_EK Offline
Newbie


Registered: 10/04/05
Posts: 15
Loc: TX
Quote:

I bought them in amber anyway, They are used JDM from japan and come with the OEM connector plugs some of you guys asked about. Problem is the plugs have three wires coming out of them. I need to know where to splice the third wire. Leave oit dangling? Or should I just use the dang female crimp connectors even though I am afraid they will fall off?

*edit* they came in today, stupid thing is I was excited because I thought before I opened the box that it would be the cam plate bolts that I need to make the car run. instead they are the damn side marker lights. DOH!

*edit again* Ok, two of the three wires are green with white stripes and the third is all black, somebody help me with this. I assume that i will use the green wires to tap and just leave the black one alone.






ok i'm having the same problem ^ he is. only to make matters more difficult, i'm trying to wire my ctr city lights in too. nothing is working right and i am running outa fuses


p.s. sorry for bringing this thread back from the dead.

Top
#50787 - 10/25/05 08:23 PM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
5iveLug_EK Offline
Newbie


Registered: 10/04/05
Posts: 15
Loc: TX
is there anyone out there with city lights AND sidmarkers?
Top
#50788 - 10/26/05 10:32 AM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
hkt03 Offline
Post Master Sr


Registered: 12/15/04
Posts: 3560
Loc: Chicago, IL
i dont see why that would be a problem, but sorry i cant help. i've had my sidemarkers sitting in my room for months.
_________________________

Top
#50789 - 10/27/05 11:11 AM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
SiToeKnee Offline
Major Member


Registered: 11/13/03
Posts: 1447
Loc: Irvine, CA
Quote:

Quote:

I bought them in amber anyway, They are used JDM from japan and come with the OEM connector plugs some of you guys asked about. Problem is the plugs have three wires coming out of them. I need to know where to splice the third wire. Leave oit dangling? Or should I just use the dang female crimp connectors even though I am afraid they will fall off?

*edit* they came in today, stupid thing is I was excited because I thought before I opened the box that it would be the cam plate bolts that I need to make the car run. instead they are the damn side marker lights. DOH!

*edit again* Ok, two of the three wires are green with white stripes and the third is all black, somebody help me with this. I assume that i will use the green wires to tap and just leave the black one alone.






ok i'm having the same problem ^ he is. only to make matters more difficult, i'm trying to wire my ctr city lights in too. nothing is working right and i am running outa fuses


p.s. sorry for bringing this thread back from the dead.




The solution that Chris Law did looks like he ended up going with our crimp connectors and not using the CTR OEM connector plug. However, with my understanding of wiring (which is limitied) I would assume that the two green wires each tap into the two "live" wires. One green would tap the red (parking lights) and the other would tap the green (turn signal) and then the black would be tapped into the ground wire. I'm not sure how this would work though, since that would allow power to always be passing through the light and I think it would just always stay on when you had your headlights on. The reason you're blowing fuses is probably because you haven't been tapping the black wire, it needs to be grounded. You also might want to consider upping the fuse value since you'll be tapping both your city lights and your sidemarker lights, although there shouldn't really be any reason too, just make sure that nothing is making contact with other wires. The option that you can do that follows our wiring, would be to remove the OEM plugs and just connect to the two metal tabs coming out of the bottom of the light plug. This would mean that only one wire would go to either red or green on your car, and the other would tap into the black (ground). As for your city lights, you would do the same thing, except you would definitely tap the red wire so that it came on only with your parking lights. I've never seen a city light blink, and there's no need for it to do so since you have a turn signal in the headlight housing already. And then the other wire would tap into the ground.

Sorry I've been MIA on this. I have no idea where Kenny (Trixiem) is, so I don't think he is going to chime in on this issue. He is more knowledgable about electrical unfortunately. I hope that this helps. Good luck.
_________________________
99 EBP Si I/H/E

Top
#50790 - 10/27/05 05:01 PM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
Trixiem Offline
Post Master Sr


Registered: 03/10/03
Posts: 3031
Loc: Las Vegas, Nv
im right here. can you take a picture of the plug and pm it to me or upload it on here. it also confuses me as to why there would be three wires coming from a single filament bulb my assumption would be to find the two live wires that actually controls the bulb... try wiring up a 9v to two of the wires to see if it lights up, then hook those wires up to the turn singal for usdm, or turn signal and park signal for JDM goodness.

As for the city light, tap both of those wires to the red(parkinglight) and ground from the headlight harness... sorry im so vague right now cause i have no access to a car for a short period of time.

i'll check back here after i look around, i think i have one of those plugs too actually. so hang tight.

-kenny

Top
#50791 - 10/31/05 08:20 PM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
intake Offline
Post Master


Registered: 07/30/00
Posts: 2805
Loc: california
Great Fucking Write up.. i cant wait to do mine * ill pay a shop to do it*.. Being on crutchs/wheelchair i dont feel comfry working on the car
_________________________
99foxsi: "She's one of the only models I would let touch my car:) . BTW, I already thought of licking her butt prints off my Si but I just quick detailed them off:(. "

Top
#50792 - 01/17/06 04:52 PM Re: Trixiem & SiToeKnee's Sidemarker How-To *56k warning*
RVelasc0 Offline
Newbie


Registered: 01/30/05
Posts: 73
Loc: 310 CA
can someone help me do this? im afraid to mess up my fenders. ill pay someone to do it.
_________________________

Top
Page 2 of 3 <123>


Moderator:  Dr. BrokenLimits, Professor Paki 
Hop to:
Shout Box

CSi Sponsors

DiGBiC Lighters
DiGBiC Lighters
DallasColo
Dallas Colocation
ClubSi.com Shirts
ClubSi-Shirts
GameStop
Black-Friday Specials
Big Brake Kits
StopTech.Sale BBK Clearance
Brake Kits
Buy Brake Kits
EBC Brake Kits
EBC Brake Kits
BuyBrakes
Brake Kits-Pads & Rotors Sets
StopTech Brake Kits
StopTech
StopTech NZ
StopTech
StopTech Australia
StopTech
Hawk Brake Pads
Hawk Brake Pads
Samys Camera
GoPros, Cameras, Gear
Brake Specials Near Me
Brake Specials Near Me
Brake Pad Coupons
Coupon Code "hondafetish"
Porsche Brakes
Porsche Brake Upgrades
2-Piece Rotors-Civic Type-R
2-Piece Civic Rotors
Advertisement

| Brake Pads | | How To Change Brake Pads | | Drilled Slotted Brake Kits Cheap | EBC Brake Kits | Performance Brake Kits | Brake Specials Near Me | How To Replace Brake Pads