Page 1 of 1 1
Topic Options
#43054 - 03/07/04 02:24 PM 99-00 Civic Si Suspension & Wheel Stats
Runnin@Redline Jr Moderator Offline
Post Master Sr


Registered: 11/02/99
Posts: 9429
Loc: Midwest Eh?
Wheels
Size: 15x6
Offset: +45mm
Weight: 16.5 lbs w/out tires
bolt pattern: 4x100
manufacturing process: Cast Alloy with machined finish - clear coated

Anti-Roll Bars
Front - 26mm
Rear - 13mm

Springs
Front - 201 lbs/in progressive rate (average)
Rear - 99 lbs/in progressive rate (average)
_________________________
Adam


Top
Videos
#43055 - 12/01/04 11:48 AM Re: 99-00 Civic Si Suspension & Wheel Stats *DELETED*
ayhum Offline
Jr Poster


Registered: 05/25/01
Posts: 89
Loc: Toronto, ON
Post deleted by Hondaman
Top
#43056 - 12/07/04 06:30 AM Re: 99-00 Civic Si Suspension & Wheel Stats
Hatched05 Offline
Jr Poster


Registered: 09/12/04
Posts: 192
Loc: Omaha Nebraska
Can someone possibly post up the correct Camber and toe?
Top
#43057 - 12/21/04 03:41 PM Re: 99-00 Civic Si Suspension & Wheel Stats
tight_99si Offline
Newbie


Registered: 11/04/04
Posts: 39
Loc: Lincoln, Nebraska
Quote:

Can someone possibly post up the correct Camber and toe?




For a 99-00 Si:

Camber: Front 0 +/- 1
Rear -1 +/- 1
Caster: Front 1.40 +/- 1
Total Toe: Front In 1.0 +/- 2.0
Rear In 2.0
_________________________
'99 MR Si (FOR SALE!!! MAKE OFFER) '04 CBR Lamborghini Yellow Pearl 1000RR (For Sale) More Pics

Top
#43058 - 06/07/06 04:04 PM Re: 99-00 Civic Si Suspension & Wheel Stats
NY-Si Offline
Newbie


Registered: 03/11/06
Posts: 27
Loc: NY
tire size from Factory is 195/55-15
Top
#2354894 - 02/21/08 06:57 PM Re: 99-00 Civic Si Suspension & Wheel Stats [Re: Runnin@Redline Jr]
redbeardmcgee Offline
Newbie


Registered: 02/25/06
Posts: 11
Loc: Santa Cruz, Ca, USA
What are the common aftermarket wheel and tires sizes and offsets used on the 99-00 Si? I know a 205 width will fit but what about 215 or 225?
Top
#2389925 - 03/02/08 03:29 PM Re: 99-00 Civic Si Suspension & Wheel Stats [Re: redbeardmcgee]
CivicRacerExR Offline
Post Master Sr


Registered: 11/05/99
Posts: 8856
Loc: Landisville, PA, USA
225/45x15" will fit with the right wheel. I had 15x7" Kosei K1s 45mm offset with 225/45x15" Hoosiers on and it rubbed without spacers on the front and rear. I added on a 5mm spacer and no more rubbing. But I also had 350f/400r spring rates too and lots of negative camber up front - almost -2.5 up front and -1.5 rear.

I also had 215/40x16" Hoosiers on a 16x7.5" Kosei K1 wheel with no rubbing problems. But it lowered the gearing ALOT. On the highway (breaking in the tires) in 5th gear at 65mph the rpms were around 5000-5500rpms! \:\) Great for autocross since you are in the sweet spot.

After that experimenting I always ran 205/50x15" Falken Azenis on 15x7" wheels.


Edited by CivicRacerExR (03/02/08 03:31 PM)
_________________________
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
Buy my Civic parts!

Top
#4922120 - 07/27/10 01:49 PM Re: 99-00 Civic Si Suspension & Wheel Stats [Re: CivicRacerExR]
natedogg Offline
Post Master


Registered: 04/07/00
Posts: 2597
Loc: MICHIGAN
I like the 225's
Top
#4936030 - 08/02/10 06:29 PM Re: 99-00 Civic Si Suspension & Wheel Stats [Re: natedogg]
yookehjohn Offline
Newbie


Registered: 07/25/10
Posts: 31
would a 205 55 16 fit or would it rub
Top
#6640538 - 10/11/12 01:09 AM Re: 99-00 Civic Si Suspension & Wheel Stats [Re: yookehjohn]
sin11234 Offline
Newbie


Registered: 10/11/12
Posts: 4
anyone run 9's on the rear
Top
#6640539 - 10/11/12 01:11 AM Re: 99-00 Civic Si Suspension & Wheel Stats [Re: yookehjohn]
sin11234 Offline
Newbie


Registered: 10/11/12
Posts: 4
camber alert lol
Top
#6797308 - 12/29/12 01:46 AM Re: 99-00 Civic Si Suspension & Wheel Stats [Re: sin11234]
maomao Offline
Newbie


Registered: 12/29/12
Posts: 1
NEW TO VISIT THIS FORUM.
Top
#6946059 - 03/12/13 01:07 AM Re: 99-00 Civic Si Suspension & Wheel Stats [Re: maomao]
livcyxingfoe Offline
Newbie


Registered: 03/12/13
Posts: 3
also had 215/40x16" Hoosiers on a 16x7.5" Kosei K1 wheel with no rubbing problems. But it lowered the gearing ALOT. On the highway (breaking in the tires) in 5th gear at 65mph the rpms were around

_________________
Runescape Gold| wow gold |cheap RS Gold

Top
Page 1 of 1 1


Moderator:  Murder, Runnin@Redline Jr 
Hop to:
Shout Box

CSi

EBC Brake Pads & Rotors | Performance Brake Kits | MagnaFlow Exhaust | Power Stop Rotors