Page 1 of 1 1
Topic Options
#1118785 - 03/04/07 09:02 PM Introducing myself
isph22 Offline
Newbie


Registered: 03/04/07
Posts: 3
Hi all this is my first post on clubsi so please dont flame me. My name is Robert and I have a 99 si that runs 14.7 with the mods listed in my sig. My wife has a 2000 integra type R witch we currently have apart, she is getting skunk stuff for her head so all the type R stuff is going on my car. Im very excited to be here finally as I have been doing hondas for 8 years now and have never been a member of this site. I hope you all are friendly and im looking for advice as well as ready to give some where needed.

My goal for my car with the type R manifold and head stuff is 14.4 - 14.5 area if it doesent make it o well not a big deal. My goal for our type r is to break 13s.

Thanks.


Edited by isph22 (03/04/07 09:03 PM)
_________________________
1999 Black Si 14.781 @ 92.65
AEM CAI, DC JDM Header, Clutch/Flywheel, Test pipe, Apexi N1 exahust

Top
Visit Sponsors! Help CSi !
#1119095 - 03/04/07 10:09 PM Re: Introducing myself [Re: isph22]
uberpollo Moderator Offline
Post Master Sr


Registered: 02/17/00
Posts: 6797
Loc: KCMO
Welcome to the site. There's a ton of good information on here. I've had JUN and Skunk component heads before and they both made similar power. You're going to need higher compression, weight reduction on the car or your wife to be a great driver to punch that type r into the 13's all motor. Check out the NA forum for more details.

Also, don't be surprised when the masses ask for pics of the wife. They don't mean to be insulting, they just don't know any better.

Enjoy the site and welcome.


(See, I'm not always an asshole) \:\)
_________________________

Top
#1119838 - 03/05/07 01:56 AM Re: Introducing myself [Re: uberpollo]
caRRRR Offline
Post Master Jr


Registered: 02/21/06
Posts: 1762
Loc: P.C. > U
welcome! forget 13's. get some boost and get in the 10's. i frequent the got boost forum mostly myself. it's a good group. check it out.
_________________________
00 FBP Si ~~ GT3582RLE 56/84

Top
#1119948 - 03/05/07 03:17 AM Re: Introducing myself [Re: caRRRR]
b6ixteen Offline
Post Master Jr


Registered: 12/29/04
Posts: 1846
Loc: Florida
Astonished you did 14.7 with those mods. What was the temp like at the track that you ran, and did you have slicks?
Top
#1120115 - 03/05/07 08:09 AM Re: Introducing myself [Re: b6ixteen]
isph22 Offline
Newbie


Registered: 03/04/07
Posts: 3
Well actually Im kinda pissed about the 14.7 @ 92.65. I had a 99 Milano red si woth the wing on it and 47K miles on it I bought for 13,000 at the time and with my only mods being AEM CAI, REGULAR 4-1 dc header, gutted cat, and N1 exhaust it ran 14.7 @ 93.8 almost 94 mph!! The si I have now is a 99 black one with no wing and 155,000 on it and more mods is running less mph in the 1/4 1.2 mph to be exact.

B6ixteen- My 14.781 run in my current car was on drag radials (14.802 Best on street tires). My old red si ran 14.7 @ 93.8 on street tires. Weather was 60s no wind and i am at sea level.
_________________________
1999 Black Si 14.781 @ 92.65
AEM CAI, DC JDM Header, Clutch/Flywheel, Test pipe, Apexi N1 exahust

Top
#1135688 - 03/08/07 03:36 PM Re: Introducing myself [Re: isph22]
FBP EM1 Offline
Soon to have boost
Post Master


Registered: 12/06/06
Posts: 2295
Loc: Yay Areeeeaaaa
Wow...nice numbers for what you got!
Welcome to CSi!
_________________________

Top
#1139940 - 03/09/07 05:19 PM Re: Introducing myself [Re: FBP EM1]
isph22 Offline
Newbie


Registered: 03/04/07
Posts: 3
I now have pics

<img src="http://img219.imageshack.us/img219/2825/1071462mz1.jpg" alt="Image Hosted by ImageShack.us"/>

http://img219.imageshack.us/img219/2825/1071462mz1.jpg

What yall think?


Edited by isph22 (03/09/07 05:24 PM)
_________________________
1999 Black Si 14.781 @ 92.65
AEM CAI, DC JDM Header, Clutch/Flywheel, Test pipe, Apexi N1 exahust

Top
#1140115 - 03/09/07 05:58 PM Re: Introducing myself [Re: isph22]
FBP EM1 Offline
Soon to have boost
Post Master


Registered: 12/06/06
Posts: 2295
Loc: Yay Areeeeaaaa
Imageshack doesnt work here...
_________________________

Top
#1190255 - 03/25/07 03:51 PM Re: Introducing myself [Re: FBP EM1]
mhart Offline
Post Master Supreme


Registered: 08/24/03
Posts: 13224
Loc: central pa
nice times!
_________________________
-Matt

Top
Page 1 of 1 1


Moderator:  uberpollo, Paksectomy 
Hop to:
Shout Box

CSi Sponsors

DallasColo
Dallas Colocation
Up Your SEO
SEO Agency Services
Brake Kits
StopTech.Sale BBK Clearance
Brake Kits
Performance Brake Kits
EBC Brake Kits
EBC Brake Kits
BuyBrakes
Brake Kits-Pads & Rotors Sets
StopTech Brake Kits
StopTech
StopTech NZ-Australia
StopTech
Hawk Brake Pads
Hawk Brake Pads
Samys Camera
GoPros, Cameras, Gear
1-800-Flowers
Flowers & Gift Baskets
WeatherTech Coupons
Coupon Code "take10"
Porsche Brakes
Porsche Brake Upgrades
Artisan Soap Lab
Handcrafted Bodycare
Advertisement

| Drilled Slotted Brake Kits Cheap | EBC Brake Kits | Performance Brake Kits | Porsche Brake Kits-Big Brake Kits | SEO Optimization-Agency-Auckland