#106005 - 09/02/05 08:21 PM
Re: B20B/B16A2 Frankenstein Build. . .Questions and Issues!!
|
b6ixteen
Post Master Jr
Registered: 12/29/04
Posts: 1846
Loc: Florida
|
Yeah I know, more problems more money more problems. Ok, I have a question regarding the Hondata system. I have the base model S200 which has the interface blue box, interface cable, datalog cable and some little chips. Could I just get the conversion harness for the P28 and then add the S200 and tune? Or do I have to have the little chips installed in the ECU for it to work? The guy I bought it from said the ECU was already chipped. . .but I don't really sure. Is there a way to tell on the ECU to know if its chipped and with what; eg. are there specific ICs in it that were not in it as stock, or virgin ECU?
I know thats a lot. . . any help is appreciated.
|
Top
|
|
|
|
#106010 - 09/05/05 10:58 AM
Re: B20B/B16A2 Frankenstein Build. . .Questions and Issues!!
|
b6ixteen
Post Master Jr
Registered: 12/29/04
Posts: 1846
Loc: Florida
|
A few pictures of work in progress. HG and ARP headstuds. . .
New IM gasket. . .
Valves Steve sent, seated with new guides.
Head and cams install. . .
GE VTEC kit adapter; with Endyn breather kit nipple to the right. . .
Car on lift after motor went in. . .

After valves adjustment the day after, I changed the valve cover.
|
Top
|
|
|
|
#106013 - 09/05/05 04:44 PM
Re: B20B/B16A2 Frankenstein Build. . .Questions and Issues!!
|
b6ixteen
Post Master Jr
Registered: 12/29/04
Posts: 1846
Loc: Florida
|
Quote:
that looks so nice. cant wait to c what it puts down. right now ur still using a stock b16 head right, cams & all?
so did u build the thing urself or did someone else do it?
Yeah the B16 head is completely stock. The only thing I did not do is what the machine shop did, ie. honing block, press in pistons to rods, install new guides and the valves, and tap the head. I assembled the block at home then took it to the shop, where two of my friends helped me with the rest.
Quote:
did you get the problems sorted
There is still a knocking sound coming from what seems to be the tranny. Oil leak has stopped, and got a oil pressure guage yesterday to keep tabs on that. Should be getting and installing a FPR in a few hours.
|
Top
|
|
|
|
#106020 - 10/07/05 03:41 PM
Re: B20B/B16A2 Frankenstein Build. . .Questions and Issues!!
|
b6ixteen
Post Master Jr
Registered: 12/29/04
Posts: 1846
Loc: Florida
|
Ok so here is the deal, car got a WOT tune two days and is running really good as far as I can see. Its tuned with Crome and thats why I am selling the S200. VTEC is set at 5400rpm but the guy said he really wouldn't know the xover that would yield most power without a dyno. Rev. limiter is at 8296rpm but I don't go more than 7500rpm. Right now, only thing set is the AFR, idle, xover etc. I will be dyno tuning in a few weeks to tweak that, get the right VTEC xover and timing. I am also proud to say I am getting at least 32hmpg with light throttle. Don't have to go too much on the throttle to move cause the torque is great. For a stock head, I think it does well, my feeling after I've seen it run is between high 13 and low 14 on the track.
Edit: I know most of you guys won't have anything to say until you see a graph with numbers.
Edited by b6ixteen (10/07/05 03:42 PM)
|
Top
|
|
|
|
#106023 - 10/09/05 05:41 PM
Re: B20B/B16A2 Frankenstein Build. . .Questions and Issues!!
|
eg2.0LT
Newbie
Registered: 08/18/05
Posts: 60
Loc: NOR T.O
|
my buddy has pretty much the same set-up stock b20 block with valve reliefs cut out, pr3 head b16 cams type r intake mani-throttle body oversize-compression is like just over 10.0 and is making 184whp 151torque with a tune and cam gears ajusted. if i were u i would go with wiseco piston and h beam rods, here in canada every all motor street competitor is using that block with stock parts but the head is shaved to the max making over 200whp
|
Top
|
|
|
|
#106025 - 10/16/05 02:16 AM
Re: B20B/B16A2 Frankenstein Build. . .Numbers In!!
|
b6ixteen
Post Master Jr
Registered: 12/29/04
Posts: 1846
Loc: Florida
|
So I went to the tracks last night. These are my best 3 times of 5 passes. Other passes were 15.1xx and 15.0xx, these were testing launch point/shift point since it was my first time with this motor. With all the runs, I have some serious traction issues even with the drag radials. These are launching at ~4000rpm and shifting at ~7600rpm. I am in right lane for each. Overall I am happy with the times and I know I am capable of much better (see 60'), so I will just do some more practising with this new setup. 
vs Mustang GT. . . ____________________ vs Integra LS (think stock). . . ___________vs Fully gutted EG w/stock B16
My setup: If its not mentioned, its stock. Block: B20B ACL race bearings Eagle H-beam rods w/ARP rod bolts Wiseco 10.8:1 pistons KMS block guard
Head: Stock B16A2/PR3
Tranny: Stock S4 Toda lightened flywheel (~10lbs) Some stage 1 clutch.
Misc.: AutoZone 3" SRI w/ K&N filter DC Sports 4-1 (not 2.5" collector) 2.5" exhaust piping back ARP headstuds Golden Eagle VTEC conversion kit EnDyn crankase breather kit RC 370cc injectors B&M FPR and fuel pressure gauge (set at 50psi) Autometer oil pressure gauge GSR water pump, oil pump, timing belt OBD2b to OBD1 conversion harness Chipped P28 w/Crome EMS (AFR WOT street tuned) Motor Pic.
I'll copy this to the first page so new people can see it on the front.
Thanks to all for help on build/parts/advice etc.  Dyno still to come.
|
Top
|
|
|
|
#106027 - 10/16/05 01:23 PM
Re: B20B/B16A2 Frankenstein Build. . .Numbers In!!
|
b6ixteen
Post Master Jr
Registered: 12/29/04
Posts: 1846
Loc: Florida
|
Yeah the torque is pretty harsh, I cannot launch at 5000rpm or more. I have my AGXs adjusted accordingly and good psi in the radials, and tried launching there on one pass. The car was hopping and moving from side to side and when I shifted to second, I got so much jerk it flung me back and my radar detector off the windscreen.
Yeah I am going to try work on a better header for now. Then I will do IM, TB, cams & valvetrain. Or should I go cams first? If I get R cams, I will just drop them in as is.
Edit: I also have a video, if anyone wants to host it or let me know where I can host it. That would be .
Edited by b6ixteen (10/16/05 01:26 PM)
|
Top
|
|
|
|
#9122632 - 09/03/17 09:45 PM
Re: B20B/B16A2 Frankenstein Build. . .Questions and Issues!!
[Re: b6ixteen]
|
fatihin nurul
Newbie
Registered: 09/02/17
Posts: 40
|
|
Top
|
|
|
|
#9210701 - 12/15/17 11:33 PM
Re: B20B/B16A2 Frankenstein Build. . .Questions and Issues!!
[Re: b6ixteen]
|
adc580888
Newbie
Registered: 12/15/17
Posts: 70
|
|
Top
|
|
|
|
#9212689 - 12/18/17 08:42 PM
Re: B20B/B16A2 Frankenstein Build. . .Questions and Issues!!
[Re: b6ixteen]
|
20171219caihuali
20171219caihuali
Unregistered
|
|
Top
|
|
|
|
#9214703 - 12/20/17 08:41 PM
Re: B20B/B16A2 Frankenstein Build. . .Questions and Issues!!
[Re: b6ixteen]
|
20171221yuanyuan
Jr Poster
Registered: 12/20/17
Posts: 93
|
|
Top
|
|
|
|
Moderator: Runnin@Redline Jr, Dr. BrokenLimits, Professor Paki
|
[ BobBarker]
I wood like, I wood like 3 chicken wings with the fly lice
[ BobBarker]
Oh yeah??? What else did they convince you of??
[ A_Mantis]
They’re eating the dogs, they’re eating the cats
[ A_Mantis]
BRB, gotta go wash the dishes before I wash the dishes
[ BobBarker]
named after the explosive diarrhea that is to ensue
[ BobBarker]
buy more shares with the same contribution, i guess
[ A_Mantis]
Also wut dat Social Security do. Looks like imma be working until I’m 160
[ BobBarker]
what dat Chevron “High Value Engineering Center” in India do?
[ A_Mantis]
Lettuce fight over dishwasher detergent
[ BobBarker]
thats what I’m using now, powdered
|
|
|