#988861 - 01/31/07 11:52 PM
My 97 S14 - SR Power'd - 400whp
|
codyace
Newbie
Registered: 01/30/07
Posts: 33
Loc: Stroudsburg (Poconos), PA
|
Just a few snaps of my little hot rod...she runs pretty good, and I affecionately beat the hell out of it on track as well. This car is certainly the 'anti hardparker', and puts all it's goodies to good use at HPDE's...
For the most part, it's a simple setup. I hate huge, non useable, peaky powerhands, and made it a point during the build to focus on the ultimate engine response possible, as well as making it handle and stop equally well. It seems like proper 'all around' cars aren't popular for some reason, so I figure why not bring the 'total car' concept back
Simple mod list (PM me if you want the whole kit-and-kabootle).. Redtop SR20DET Jim Wolf Technology (JWT) ECU JWT S3 Camshafts Mototron 60lb injectors Ford Cobra MAF Garrett GT2871r .64 (extrude honed) OEM Nissan Turbo Manifold (Swain coated, and extrude honed) Greddy Intake Manifold 3" Greddy o2 Housing 3" Downpipe 3" RsR ExMAG exhaust (nice chambered muffler, no glasspacks for me!) JWT Clutch Kit Kaaz 1.5 LSD Z32 30mm Iron Calipers+Carbotech Panther + Pads
Suspension: MR Coilovers Whiteline F+R swaybars Nismo Powerbrace Couresy Nissan Front Strut Brace Dupree Subframe spacers Dubeloz Rear Cross Brace Cusco RUCA's SPL Tension Arms Dubeloz Floor Support Bars Dubeloz C Pillar bar
Bling: HaHa, yea right
Apperance: JDM OEM Nissan Front Bumper Greddy Gracer fron Lip (wanted flexible material so when I bash it off FIA curbs, it doesn't crack) 6k HID's (I hate not being able to see at night)
Track Wheels: (and pictured) Z33 'Track' Edition 18's (Made by Rays Engineering) wearing Hankook Ventus Z212's...
Daily Grind Wheels: Volk 57pros in full RMC/Chrome 18's (wearing cheap rubber)
(I also have my old 'temp' Z33 base model wheels in the one set of pics)
EDIT: I forgot to mention, I did all work MYSELF on the car...tore down the engine, stock rebuild, install, wiring, suspension...the only part I didn't do was align the car, and help mold in the new water temp gauge into the cigg lighter area (no pics of that yet in car)
Alas here are some pics...
Edited by codyace (01/31/07 11:59 PM)
_________________________
Cody Ace - 1997 Nissan 240sx - SR Power - 400 whp, GT2871r .64
|
Top
|
|
|
|
#988921 - 02/01/07 12:07 AM
Re: My 97 S14 - SR Power'd - 400whp
[Re: codyace]
|
Billy Bibbit
Post Master Supreme
Registered: 03/22/02
Posts: 15835
Loc: Indiana
|
looks clean.. and gets used! now get some 17x10" wheels in a +15mm.. overfenders and youll be set!
|
Top
|
|
|
|
#988930 - 02/01/07 12:11 AM
Re: My 97 S14 - SR Power'd - 400whp
[Re: Billy Bibbit]
|
denham
Post Master Supreme
Registered: 04/20/03
Posts: 28051
Loc: Macungie
|
welcome to CSI CODY!
whooooo! today is the first day, of the rest of your life here. lol.
_________________________
Mott - www.sloppymechanics.com "I'm gonna denmah my gf tonight." LNXGUY "Denmah has the most consistently entertaining posts of any member here" - Adam G "denmah: because canada can't be the only country with a moof" - jsmonet "LOL, you really are my hero denmah. You actually do the things the rest of us dream or bullshit about." - 98_1LE
|
Top
|
|
|
|
#991931 - 02/01/07 06:21 PM
Re: My 97 S14 - SR Power'd - 400whp
[Re: ]
|
Nate047
Post Master Supreme
Registered: 03/03/03
Posts: 28558
Loc: La La Land, CA
|
|
Top
|
|
|
|
#993084 - 02/01/07 11:17 PM
Re: My 97 S14 - SR Power'd - 400whp
[Re: Nate047]
|
codyace
Newbie
Registered: 01/30/07
Posts: 33
Loc: Stroudsburg (Poconos), PA
|
Yep, Stroudsburg (Poconos) (Gotta update my info, sorry hehe)
lest fanb0i-ish S14 I've seen in a LONG Nate
Thanks Nate...and Im' glad someone else noticed that I hate the current trends! I mean there are some things I didn't 'need' to get, such as the s15 wheel (could have gotten a real aftermarket one, but this works just as good), and maybe we'll say the RSPL intercooler setup with the polished pipes (I think black and chrome look good tho)... but everything else is, well functionable to me...
I guess I got tired of seeing the same drawn out thing on the 240 forums, and especially got tired of people not knowing how to setup an engine combo...to many '350 whp, 300 ft lbs @ 20 psi...why?' kinda threads. People said JWT Rom tunes suck, people said JWT S3 cams aren't better than HKS cams, and people said that a stock exhaust manifold will never make power....and well (and I don't want to sound cocky) I shut most of them up when I went ahead, did my thing, and proved them wrong.
I can't wait till spring when NASA/PDA open up again...and I'm raelly looking forward to also getting up to Watkins Glen again in the fall...
_________________________
Cody Ace - 1997 Nissan 240sx - SR Power - 400 whp, GT2871r .64
|
Top
|
|
|
|
#996401 - 02/02/07 07:13 PM
Re: My 97 S14 - SR Power'd - 400whp
[Re: Nate047]
|
Slammed_am
Jr Member
Registered: 03/03/05
Posts: 477
Loc: Old Forge, PA
|
Dope car! Nice to see somone else from the area...I'm from the Scranton vacinity
|
Top
|
|
|
|
#1018040 - 02/08/07 06:37 PM
Re: My 97 S14 - SR Power'd - 400whp
[Re: Slammed_am]
|
codyace
Newbie
Registered: 01/30/07
Posts: 33
Loc: Stroudsburg (Poconos), PA
|
|
Top
|
|
|
|
#1021985 - 02/09/07 06:41 PM
Re: My 97 S14 - SR Power'd - 400whp
[Re: 99 SI AutoXer]
|
ajuesnEx00
Post Master Sr
Registered: 09/11/00
Posts: 3187
Loc: USA
|
car def. looks bad ass with the track 350z wheels!
|
Top
|
|
|
|
#1030136 - 02/12/07 01:38 AM
Re: My 97 S14 - SR Power'd - 400whp
[Re: ajuesnEx00]
|
codyace
Newbie
Registered: 01/30/07
Posts: 33
Loc: Stroudsburg (Poconos), PA
|
car def. looks bad ass with the track 350z wheels!
What makes them even better, is that they are 18" and featherweights!
_________________________
Cody Ace - 1997 Nissan 240sx - SR Power - 400 whp, GT2871r .64
|
Top
|
|
|
|
#1046768 - 02/13/07 11:58 PM
Re: My 97 S14 - SR Power'd - 400whp
[Re: codyace]
|
SamuraiSam
Post Master Sr
Registered: 07/29/02
Posts: 8828
Loc: Bellingham, WA
|
Awesome freaking car. More awesome if you ever get back to my last question filled PM
|
Top
|
|
|
|
#1054818 - 02/15/07 07:28 PM
Re: My 97 S14 - SR Power'd - 400whp
[Re: SamuraiSam]
|
JDMaHolicAccord
Sr Member
Registered: 06/08/06
Posts: 1229
Loc: Columbus, Ohio
|
i want horsepower
_________________________
my sister said she wants to fuck me, but i have a gf HAHAHAHA..... sig updated
|
Top
|
|
|
|
#1088982 - 02/24/07 06:07 PM
Re: My 97 S14 - SR Power'd - 400whp
[Re: morpheus]
|
codyace
Newbie
Registered: 01/30/07
Posts: 33
Loc: Stroudsburg (Poconos), PA
|
Three Options:
Eat Ramen and Pretzles for months = buy turbo Go overseas = come home and buy turbo Or the favorite = sell pot ;P
I keed
Where did you get your manifold "Swain coated, and extrude honed" (if you did it yourself how much would you do it for others)
The Swain coating (is the best heat coating bar none available today: http://www.swaintech.com
The extrude hone is the best port/polish/hone stuff on the market today as well http://www.gethoned.com
Car looks good, the best part about it is the powerband really.
I'll be installing cam gears soon...hope to widen that torque curve even more
Too bad you dont get it sideways.
No offense to you or the drift guys, but I think drifting is totally lame. Does it require skill? Certainly. Good driver? Yes as well....but to me it's a pointless way to smash your car all to hell.
Grip Driving will forever > Drifting in my book. As we say, the slowest way around a corner is sideways :P
I like it with that first set of wheels. What are they? 350z wheels?
THe multi spoke ones are 350z base model 17's. They are heavy as hell, and the tires on them were about smoked...so I somehow fell into a perfect situation to get a set of The Ray's 18" Track Wheels UBER cheap, and jumped on it
Edited by codyace (02/24/07 06:28 PM)
_________________________
Cody Ace - 1997 Nissan 240sx - SR Power - 400 whp, GT2871r .64
|
Top
|
|
|
|
#9236001 - 01/21/18 09:20 PM
Re: Внедрение балльной системы учёта нарушений:
[Re: ]
|
Andada
Andada
Unregistered
|
|
Top
|
|
|
|
Moderator: LovemySi, Honda350, Professor Paki
|
|