|
zdizzle
|
|
(Jr Poster)
|
|
02/22/07 07:10 AM
|
|
|
|
|
|
|
clutch selection
|
|
i need some help selecting my clutch. i got b16 S2intake manifold st1cg and loabes greddy header intake your basic setup.Im also running a hydralic clutch, ive looked at various clutches what stage should i get.If i get stage3 will it be too much? I know i dont make enought power for that stage but wouldnt it just be more of a beefer clutch im also thinking of lighten the flywheel. With a burned up clutch i was running low tens in the the 1/8
|
|
|
|
Re: clutch selection
|
|
I have run a ACT Hi 6 puck on my street CRX with no problems I would highly recomend ACT I have beat that thing at the track with slicks which are hard on the clutch for 5 years still racing on it no problems. Rob
|
|
|
|
Re: clutch selection
|
|
If you do go 6 puck, please make sure you get the sprung hub. It's actually pretty streetable. If you get the unsprung, it's like an on off switch.
Honestly, the 6 puck is too much clutch for your set up.
|
|
MEH
|
|
(Newbie)
|
|
11/19/07 05:16 PM
|
|
|
|
|
|
|
|
Re: clutch selection
|
|
Go with the ACT 5 Puck for street, you'll be fine.
I have that in my street SI and its perfect. Clutchmaster's Twin Disc in the drag car!
|
